Australia · mining · Updated 2026-11-03 · TYI UAV
Open-cut mining in Australia presents a specific set of survey problems. Pit floors, benches and haul-roads cover large areas with limited fixed takeoff space. A VTOL Fixed-Wing combines vertical takeoff from a service road with efficient cruise for area mapping. For a buyer, the key question is not only airframe performance but supplier capability: a qualified VTOL Fixed-Wing supplier Australia relationship must handle import, certification, support and payload integration.
Typical constraints observed on site include:
The Xuntian TY-25 and TY-35 are VTOL Fixed-Wing airframes with the following confirmed specifications:
Wingspan in this range allows transport in a dual-cab ute with removed tail booms and field assembly under 30 min with trained crew. Payload under 2-10 kg supports EO/IR gimbals, small LiDAR or magnetometer depending on sortie goal. Endurance of 160-220 min enables a single sortie to cover multiple benches and return with reserve.
For haul-road inspection, a 2-3 kg EO/IR payload is usually sufficient. For volumetric stockpile and pit mapping, a 5-10 kg LiDAR or photogrammetry kit may be selected within the < 2-10 kg limit. Buyers should request payload centroid and CG envelope from the VTOL Fixed-Wing supplier Australia candidate before committing to a sensor.
Published endurance of 160-220 min is at nominal payload and standard ISA conditions. In 40°C heat, plan a usable flight of 130-180 min and keep 20 min reserve for unplanned hover or divert. This still outperforms multirotor options on area per day.
Australian mining operators must align drone use with CASA Part 101 and site SOPs. A VTOL Fixed-Wing supplier Australia engagement should include:
Units are export-ready from OEM with composite tooling in-house. Buyers should budget for Australian import declaration, possible inspection, and GST. Confirm HS code with freight forwarder to avoid hold at port.
| Use case | Recommended payload | Sortie time needed |
|---|---|---|
| Haul-road inspection | 2-3 kg EO/IR | 60-120 min |
| Open-cut pit mapping | 5-10 kg LiDAR | 160-220 min |
Dust and salt require sealed payload bays and conformal-coated electronics. Confirm IP rating of bays and service interval for actuator cleaning. Composite wings resist corrosion but hinge and latch hardware must be stainless or treated.
| Platform | Payload | Endurance | Primary use |
|---|---|---|---|
| Xuntian TY-25 / TY-35 | < 2–10 kg | 160–220 min | Mapping & surveying |
| Heavy-Lift VTOL 3800–4800 | 15–30 kg | 240–360 min | Heavy payload delivery |
| Catapult VTOL 1400–2150 | 2.5–6 kg | 25–40 min | Rapid deployment |
| TY-05 / 05A / 05B Series | 15–50 kg | 70 min – 6–7 h | Long-range survey |
| Question | Answer |
|---|---|
| What payload can the TY-25/TY-35 carry for mine survey? | Confirmed payload is < 2-10 kg. A 2-3 kg EO/IR set fits haul-road inspection; 5-10 kg LiDAR fits pit mapping within the same airframe class. |
| Is BVLOS possible with this VTOL Fixed-Wing in Australia? | The airframe supports long-endurance flight of 160-220 min, but BVLOS requires CASA approval and site SOPs. Supplier must provide telemetry, lost-link and geofence docs. |
| How does heat affect endurance? | At 40°C plan usable flight near 130-180 min from the 160-220 min spec, keeping 20 min reserve for hover or divert. |
| What should I verify with a VTOL Fixed-Wing supplier Australia? | Verify OEM/ODM build, in-house composite tooling, CE/EAC cert, spare lead times, and that specs match wingspan 2500-3500 mm, payload < 2-10 kg, endurance 160-220 min. |
TYI UAV — OEM/ODM fixed-wing VTOL manufacturer, CE/EAC certified. TY-25/TY-35 VTOL Fixed-Wing offers 160-220 min endurance and < 2-10 kg payload to map large pits and inspect haul-roads in one sortie, with OEM in-house tooling for mine-specific build.